Our Projects

U.S. Custom House - Charleston, SC

We were retained by Liolio Architects to survey and determine the appropriate hardware for the restoration of the ground floor of the U.S. Custom House. We custom made hardware for the project in solid bronze. Double door entry sets required 30 inch flush bolts. Hinges were hand cast to reproduce existing hinges. The U.S. Custom House is on the register of Historical Places.

Rutherford B. Hayes Mansion - Columbus, OH

After Rutherford B. Hayes completed his term as President, he retired to his estate in Freeman, Ohio. The mansion, constructed from 1859 to 1863, had been restored with the exception of one room referred to as the "Inner Sanctum." It was a large bathroom equipped with bathroom fixtures as well as a desk, file cabinets, and landscaping tools.  We reproduced the hardware for his desk, cabinetry, as well as a pocket door set and decorative entry door hinges from archived pictures, as shown to the right. We also provided reproduction hardware for other parts of the house and restored the home's plumbing to it's original (1880 remodeled) condition.

Nathaniel Russell House - Charleston, SC

We often work in conjunction with the Historic Charleston Foundation to reproduce antique hardware from some of Charleston's finest homes. We recently reproduced a plantation shutter knob for the Nathaniel Russell House, one of their museum houses. This house, built in 1808, is one on the finest surviving examples of Federal architecture in the US. During renovations of the house, a shutter knob was found on one of the shutters in a window that had been walled off years ago. No other knobs remained in the house. The restoration committee of the house contacted us as and requested that we

reproduce the knob. The knob was sent to our forge and was reproduced using the same techniques and materials as the antique original. The face of the knob and the rosette were forged and the base was sand cast in solid brass. The committee examined the knob and approved its use in the restoration of the house. 125 knobs were made and are installed in the house. This knob is listed under kitchen hardware and is part of our Historic Charleston Hardware Collection.

Dewitt County Courthouse - Dewitt County, TX

Built in 1890, the Dewitt County Courthouse was constructed with close attention to detail and included the Oriental pattern hardware made by Branford Lock Works of Branford, CT. We reproduced complete interior and entry door sets including the locks, plates, doorknobs and hinges. We adapted the original design for modern security of the exterior and courtroom doors. We worked with the architect and contractor in the design, selection and installation phases.

1875 Itialianate Home - Asheville, NC

This beautiful Italianate home in Asheville, NC was built in 1875. We reproduced sterling silver plated doorknobs, rosettes, locks, and hinges from antique originals. Note the detailing of the serpents on the hinges. The hinges have beautiful decorative plates to hide the mounting screws.

This Victorian style courthouse of McCulloch County, Texas was built in 1890. We reproduced cast bronze Victorian period decorative hardware including the Diagonal design hinges, doorknobs, and rosettes first created by the Corbin Lock Company.  The courthouse is on the National Register of Historic Places. 

McCulloch County Courthouse - Brady, Texas

Aiken Rhett House - Charleston, SC

The Aiken Rhett House is a museum house maintained by the Historic Charleston Foundation. We are licensed to reproduce hardware on their behalf. We reproduced shutter hardware in hand wrought iron based on an original slave made shutter dog. The pattern is now available in our Shutter Hardware section and is part of our Historic Charleston Foundation Hardware Collection. The house was built in 1818 and was added on to in subsequent years. The property is the most intact surviving example of an urban plantation house with it's outbuildings.

Frequently called "America's Most Haunted Hotel", the Crescent Hotel is recognized by the National Trust as an elite member of "Historic Hotels of America". We were retained by the owners to reproduce its antique cast bronze doorknobs and rosettes. Working from original samples we analyzed and matched the metallic content and sand cast each piece. Finishing was done by hand using the same techniques of over 120 years ago.  The building boasts a fascinating and haunted past and is on the National Register of Historic Places.

The Crescent Hotel - Eureka Springs, AR

Lowndes Grove was built in 1786 on the banks of the Ashley River in Charleston, SC. We provided solid cast brass doorknobs and rosettes appropriate for the period. The owners selected our brass decorative head and foot bolts for the double doors leading to the piazzas. With a rich history spanning from Revolutionary times until today, the house was added to the National Register of Historic Places in 1978.

Lowndes Grove Plantation - Charleston, SC

Governor Thomas Bennett House - Charleston, SC

South Carolina's Governor Thomas Bennett built his house in Charleston, SC in 1820 when Charleston was the state capitol. We reproduced the original hand wrought slave made shutter hardware from antique originals. The pattern is now available in our Shutter Hardware section and is part of our Historic Charleston Foundation Hardware Collection.

This lovely art deco styled 8 story courthouse of Potter County, Texas was built in 1920-1930. We reproduced antique mortise locks and strike plates that were compatible with the building's existing antique doorknobs. We also reproduced the exterior push/pull bars from an original.  Plain interior hardware of heavy cast brass was restored and reproduced. The court-house is on the National Register of Historic Places.

Potter County Courthouse - Amarillo, TX

Along the banks of the Stono River, Fenwick Hall was built in 1730 and is one of the finest examples of Georgian architecture still standing in South Carolina. In 2006 we were comm-issioned by the owner to restore the two large rim locks from the manor house. Our locksmith in England reproduced the original keys and recast broken and missing parts to return the locks to their original working order. Charleston Hardware Co. also reproduced the original 24 inch long wrought iron strap hinges and shutter dogs for the carriage house.

Fenwick Plantation - Johns Island, SC

St. Matthews Church - Charleston, SC

St. Matthews on King Street in Charleston SC was built in 1872.  After doing a thorough site visit, we found that the original hardware had been replaced with antique residential hardware.  Nothing matched.  Upon further investigation, we found one piece of original silver plated hardware on the entry doors.  We reproduced the hardware in solid brass and then silver plated it.  Interior hardware was made in unlacquered brass.

Gibbes Museum of Art - Charleston, SC

The Gibbes Museum was built in 1858. We reproduced window and door hardware for the Gibbes Art Gallery in Charleston, SC.  It’s neoclassical style includes and Egg and Dart rectangular back plate with large palm decoration.  Cast in solid brass, it required special hand finishes. 


Social Media

  • Facebook Social Icon
  • Instagram
  • Pinterest
  • Houzz Social Icon

Visit Us

4236 Pace Street

North Charleston SC 29405

Subscribe for product updates and get 10% off of your first order!

Hours:  8-5 EST


Contact Us

Toll Free: 866.958.8626

International: 001.843.958.8626


  • Return Policy:  Returns are accepted for refund or exchange if returned in original unused saleable condition with all parts and pieces.  Refunds or credits will be issued the same day as received.  For returns after 30 days, a 25% restocking fee will be charged.  Shipping costs for returns due to our mistake will be paid by CHC0.  Others by customer.  Please include a note with contact info and reason for return or copy of invoice.  Let us know in advance of your return at contact@chco.biz

  • Privacy Policy:  We do not sell our customer lists to anyone.  We send marketing emails from time to time.  You may request that they not be sent by clicking the unsubscribe link.
  • Terms and Conditions:  Payment at time order is placed unless a commercial account has been opened.

  • Warranty:  defective hardware will be repaired or replaced as indicated at no charge for a period of 5 years.  Finishes are warranted for 1 year

Copyright 2021 Charleston Hardware Company
Kitchen Cabinet and Drawer Hardware